Pressure washing is a method of cleaning commercial, industrial and residential buildings, vehicles, basements and many other places. It involves a high pressure jet of water at very high pressure that removes debris. Imperium Building Services has become quite popular worldwide because of its ability to clean stubborn grime from surfaces, brickwork, pavers, tiles and other rough surfaces without destroying the surface. Pressure washing is also useful in removing rust and scale on metal parts. It is one of the quickest methods for getting rid of dirt and grime from any hard surface.
Pressure washing or high pressure washing is the process of using high-powered water jet pressure at very high speeds to remove loose dirt, mud, tar, grease, grit, dust, chewing gum, mould, dirt, grime and other contaminants from residential, commercial, industrial and mechanical surfaces including bricks, concrete, pavers, tiles and metal surfaces. Pressure washing equipment consists of water tanks, hoses, blowers, paddles, pressure wand, air tanks and brushes. Pressure washing machines can be built by anybody with basic or advanced DIY knowledge, although there are some commercially available pressure washers that are very sophisticated. Pressure washing products are usually sold in spray bottles or in a container that can be plugged into an existing water supply.
When using pressure washing to clean molds and algae on your home or in your garden, it is advisable to first make sure that your garden or residential building is completely free from any algae or mold. A thorough inspection will allow you to identify where the source of the algae or mold is so that you can address the issue before actually using any pressure washing products. You may find that there are already or molds growing on the exterior surfaces of your building or outside walls which have not been cleaned.
The first and main difference between pressure washing and regular water washing machines is that the pressure washer sprays a very fine jet of water at very high pressures. The water is usually pumped through a powerful vacuum system that prevents dirt, sand and debris from being blown back into the spray face. The water is sprayed from the nozzle in a pattern that causes the algae and mold to be blasted away from the surface of the material being washed. Pressure washing also uses chemicals which can sometimes help to reduce the growth of algae or mold. In contrast to regular washing detergents, which are known for their strong detergent properties, power washing detergents do not contain any bleach or disinfectants. Bleach and disinfectants will cause a buildup of organic matter in the water lines and can also harm the aesthetic appearance of your freshly cleaned surfaces.
The second major difference between a pressure washing machine and a normal temperature washer is the speed of the cycle. With a normal temperature machine, it takes around 2 minutes to complete one cycle. Using a pressure washing device, this time is cut down to a minimum, sometimes as much as half the time, which significantly cuts down on cleaning time. Normal temperature washers can take anywhere from four to five hours to complete a single cycle. Some units have a variable number of cycles, which can give you a huge savings over the course of an entire project. Using a pressure washing unit with a normal temperature washer might take twice as long to finish, but that same project would be finished in about half the time.
The third difference between power washing and normal washing is what happens to the dirt and debris after it’s been kicked out of the unit. Most conventional outdoor power washing units automatically push and carry away the dirt and debris, but a pressure washing unit leaves the dirt in the unit so it can be cleaned up. Algae, mold and mildew can form in areas where the dirt is kicked out, and in the process they become dark, slimy and ready to cause trouble to anyone who gets in contact with them. By pushing the dirt and debris out of the area, a pressure washing unit leaves the area cleaner and free of unsightly mold and mildew. Power washing can also help reduce the amount of times a lawn needs to be treated by a professional. Many homeowners don’t have the extra money or time to spend a few hours per day keeping their lawn free of algae, mold and mildew, and using a pressure washer allows them to get the work done and get it done quickly.
